It is common to ask the question, “How to refinish fiberglass doors?” There are multiple ways to accomplish this task. Learning how to restain a fiberglass exterior door by yourself can help you save a lot of money. The first step you will need to follow is to remove the door from the frame and hinges. You can accomplish this using a screwdriver, in most cases. Once you have removed the door from the door frame, you will need to place it on a flat surface where it is safe and clean. You should always read the manufacturer’s directions for refinishing a door. You should also understand that the door might not look like it did originally, as you are doing the job yourself. A professional can improve the overall quality of the finished project.
You will need a soft steel wool coil to rub the existing finish off of the exterior doors Oakville. Rub the steel wool in a vertical motion until the previous finish is gone. Avoid rubbing the wool in multiple directions, as it will look messy. The next step in learning how to refinish fiberglass doors is to sand down the door. If needed, use a paint scraper to reach small nooks and crannies of the door. Wipe down the door with a wet cloth that has been dipped in a gentle cleanser. Allow the door to dry completely. Wipe the door down again once you are completely sure it is dry. You can now apply the stain or primer to the door. When applying the prime or stain to the door, you should use smooth strokes that are long and soft. Avoid applying the stain in multiple directions. If you start using vertical strokes, you should stick to the up and down motion.
Take your time when learning how to refinish fiberglass doors. You want to educate yourself as much as possible to ensure the best results. You should also be patient when learning how to restain fiberglass exterior doors for the home. The more time you put into the project, the better it will look. Use a clean rag to remove all signs of excess primer or stain. Let the stain dry for at least twenty-four hours. It is better to wait at least thirty-six hours for the stain to dry. Most people prefer to apply a coat of primer before adding a coat of stain. The choice is yours, but adding primer before the stain can improve the longevity of the finish.
Apply a Second Coat
When learning how to refinish fiberglass doors, you should always apply a second coat of stain. The second coat of stain can improve the quality of the finish. When the second coat is dry, you can start applying the paint of your choice. Avoid front door paint or applying stains in the direct sunlight. Direct sunlight can speed up the drying process. Stain or paint that dries before you are finished applying it can look thick and choppy. You can avoid this problem by painting in a cool place that is dry and free of direct light.
The last step of learning how to refinish fiberglass doors involves applying a finishing coat. You can use any type of finisher that you wish. Always allow plenty of time for the finish to dry before you attempt to rehang the door. When you are done, you can hang the door as it was before you took it down. You can turn to us at TH Windows and Doors Oakville to learn more valuable information about doors and windows.